Hilti HIT-HY 150 MAX Fast Cure Hybrid Adhesive Alternative

April 16th, 2014

If you have been using Hilti HIT-HY 150 MAX to attach anchors in uncracked concrete and grouted masonry we have another solution that may be able to provide significant project savings.  Powers Fasteners AC 100+ Gold  is a two-component, high-strength structural adhesive anchoring system meets IBC for strength design of concrete anchors. It can be used to bond threaded rod and reinforcing bar into solid concrete and masonry base materials and can also be used to anchor into hollow masonry materials using screen tubes. AC 100+ Gold has a low-odor formulation free of styrene and volatile organic compounds (VOCs).

  •     Dispense with either a manual or powered dispensing tool
  •     Ideal for cold and moderate weather applications and works well in damp/wet holes
  •     May be used for oversized holes up to 1/4″ larger than rod size
  •     Allows for dependable fastening and a quick cure over a wide range of temperatures and base materials
  •     Provides fast and effective means for anchoring rod, rebar and threaded insert into concrete

Listings/Approvals for Hilti HIT-HY 150 MAX:

ICC-ES (International Code Council) – ESR-1967 for masonry and ESR-2262 for
uncracked concrete
COLA (City of Los Angeles) – RR-25652 and RR-25652M for masonry NSF/ANSI
standard 61 Certification for potable water

Listings/Approvals for Powers AC100+ Gold:

International Code Council, Evaluation Service (ICC-ES) ESR-2582 (Including FBC Supplement)
Code compliant with the 2009 IBC, 2009 IRC, 2006 IBC, 2006 IRC, 2003 IBC and 2003 IRC
Tested in accordance with ASTM E 488 and ICC-ES AC308 for use in structural concrete with ACI 318
Appendix D (Strength Design) and as amended by provisions of ICC-ES AC308 Annex A, Section
3.3 (www.icc-es.org)
Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects;
minimum requirements for materials in contact with potable water and water treatment
Conforms to requirements of ASTM C 881, Types I, II, IV and V, Grade 3, Classes A & B
(meets Type III with exception of elongation)
Department of Transportation listings – see www.powers.com or contact transportation agency